100% Off Coupon - 200-301 Cisco Certified Network Associate

The exam will help you get the role of:

Entry-level network engineer

Network administrator

Network support technician

Help desk technician

Course Structure

Cisco Certified Network Associate CCNA (200-301) covers the following topics-

1. Network Fundamentals 20%

1.1 Explain the role and function of network components

1.2 Describe the characteristics of network topology architectures

1.3 Compare physical interface and cabling types

1.4 Identify interface and cable issues (collisions, errors, mismatch duplex, and/or speed)

1.5 Compare TCP to UDP

1.6 Configure and verify IPv4 addressing and subnetting

1.7 Describe the need for private IPv4 addressing

1.8 Configure and verify IPv6 addressing and prefix

1.9 Compare IPv6 address types

1.10 Verify IP parameters for Client OS (Windows, Mac OS, Linux)

1.11 Describe wireless principles

1.12 Explain virtualization fundamentals (virtual machines)

1.13 Describe switching concepts

2. Network Access 20%

2.1 Configure and verify VLANs (normal range) spanning multiple switches

2.2 Configure and verify Interswitch connectivity

2.3 Configure and verify Layer 2 discovery protocols (Cisco Discovery Protocol and LLDP)

2.4 Configure and verify (Layer 2/Layer 3) EtherChannel (LACP)

2.5 Describe the need for and basic operations of Rapid PVST+ Spanning Tree Protocol and identify basic operations

2.6 Compare Cisco Wireless Architectures and AP modes

2.7 Describe physical infrastructure connections of WLAN components (AP, WLC, access/trunk ports, and LAG)

2.8 Describe AP and WLC management access connections (Telnet, SSH, HTTP, HTTPS, console, and TACACS+/RADIUS)

2.9 Configure the components of a wireless LAN access for client connectivity using GUI only such as WLAN creation, security settings, QoS profiles, and advanced WLAN settings

3. IP Connectivity 25%

3.1 Interpret the components of the routing table

3.2 Determine how a router makes a forwarding decision by default

3.2.c Routing protocol metric

3.3 Configure and verify IPv4 and IPv6 static routing

3.4 Configure and verify single area OSPFv2

3.5 Describe the purpose of first-hop redundancy protocol

4. IP Services 10%

4.1 Configure and verify inside source NAT using static and pools 2019 Cisco Systems, Inc. This document is Cisco Public. Page 4

4.2 Configure and verify NTP operating in a client and server mode

4.3 Explain the role of DHCP and DNS within the network

4.4 Explain the function of SNMP in network operations

4.5 Describe the use of syslog features including facilities and levels

4.6 Configure and verify DHCP client and relay

4.7 Explain the forwarding per-hop behavior (PHB) for QoS such as classification, marking, queuing, congestion, policing, shaping

4.8 Configure network devices for remote access using SSH

4.9 Describe the capabilities and function of TFTP/FTP in the network

5. Security Fundamentals 15%

5.1 Define key security concepts (threats, vulnerabilities, exploits, and mitigation techniques)

5.2 Describe security program elements (user awareness, training, and physical access control)

5.3 Configure device access control using local passwords

5.4 Describe security password policies elements, such as management, complexity, and password alternatives (multifactor authentication, certificates, and biometrics)

5.5 Describe remote access and site-to-site VPNs

5.6 Configure and verify access control lists

5.7 Configure Layer 2 security features (DHCP snooping, dynamic ARP inspection, and port security)

5.8 Differentiate authentication, authorization, and accounting concepts

5.9 Describe wireless security protocols (WPA, WPA2, and WPA3)

5.10 Configure WLAN using WPA2 PSK using the GUI

6. Automation and Programmability 10%

6.1 Explain how automation impacts network management

6.2 Compare traditional networks with controller-based networking

6.3 Describe controller-based and software-defined architectures (overlay, underlay, and fabric)

6.4 Compare traditional campus device management with Cisco DNA Center enabled device management

6.5 Describe characteristics of REST-based APIs (CRUD, HTTP verbs, and data encoding)

6.6 Recognize the capabilities of configuration management mechanisms Puppet, Chef, and Ansible

6.7 Interpret JSON encoded data

How to Enroll 200-301 Cisco Certified Network Associate – Test Prep Exam course?

To Access "200-301 Cisco Certified Network Associate – Test Prep Exam" Click on Enroll Now button at end of the post. It will redirect you to Udemy Course Page and then you can start the enrollment process.

If you're New to Udemy? Sign up with your email and create a password. for Existing users, log in with your credentials to access course.

How many members can access this course with a coupon?

200-301 Cisco Certified Network Associate – Test Prep Exam Course coupon is limited to the first 1,000 enrollments. Click 'Enroll Now' to secure your spot and dive into this course on Udemy before it reaches its enrollment limits!